#!/bin/bash
### BEGIN INIT INFO
# Provides:          cgrates
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: CGRateS real-time charging system
# Description:       Control CGRateS - carrier grade real-time charging system
### END INIT INFO

# Author: DanB <danb@cgrates.org>
#
# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="CGRateS real-time charging system"
NAME=cgrates
DAEMON=/usr/bin/cgr-engine
USER=cgrates
GROUP=cgrates
DAEMON_OPTS=""
TUTFOLDER=/usr/share/cgrates/tutorials/kamevapi/cgrates
TMP_DIR=/tmp/cgr_kamevapi/cgrates
SCRIPTNAME=$TUTFOLDER/etc/init.d/$NAME
RUNDIR=$TMP_DIR/run
PIDFILE=$RUNDIR/cgr-engine.pid
STACKTRACE=$RUNDIR/$NAME.strace
ENABLE=true
DAEMON_OPTS="-config_path=$TUTFOLDER/etc/cgrates"
CDREDIR=$TMP_DIR/cdre

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions

if [ "$ENABLE" != "true" ]; then
  echo "$DESC not yet configured. Edit $DEFAULTS first."
  exit 0
fi

# Install the run folder
if [ ! -d $RUNDIR ]; then
  mkdir -p $RUNDIR
  touch $STACKTRACE
  chown -R $USER:$GROUP $RUNDIR
fi
# Install the cdre folder
if [ ! -d $CDREDIR ]; then
  mkdir -p $CDREDIR
  chown -R $USER:$GROUP $CDREDIR
fi

#
# Function that starts the daemon/service
#
do_start()
{
	# Return
	#   0 if daemon has been started
	#   1 if daemon was already running
	#   2 if daemon could not be started
    echo "\n### Started at:" `date`>>$STACKTRACE
	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test\
                || return 1
 	start-stop-daemon --start --quiet --chuid $USER:$GROUP --make-pidfile --pidfile $PIDFILE --background\
		--startas /usr/bin/bash -- -c "exec $DAEMON $DAEMON_OPTS >> $STACKTRACE 2>&1" \
		|| return 2
}

#
# Function that stops the daemon/service
#
do_stop()
{
	# Return
	#   0 if daemon has been stopped
	#   1 if daemon was already stopped
	#   2 if daemon could not be stopped
	#   other if a failure occurred
	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE
	RETVAL="$?"
	[ "$RETVAL" = 2 ] && return 2
	# Wait for children to finish too if this is a daemon that forks
	# and if the daemon is only ever run from this initscript.
	# If the above conditions are not satisfied then add some other code
	# that waits for the process to drop all resources that could be
	# needed by services started subsequently.  A last resort is to
	# sleep for some time.
	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
	[ "$?" = 2 ] && return 2
	# Many daemons don't delete their pidfiles when they exit.
	rm -f $PIDFILE
	return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
	#
	# If the daemon can reload its configuration without
	# restarting (for example, when it is sent a SIGHUP),
	# then implement that here.
	#
	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
	return 0
}

case "$1" in
  start)
	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
	do_start
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  stop)
	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
	do_stop
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  status)
	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
	;;
  #reload|force-reload)
	#
	# If do_reload() is not implemented then leave this commented out
	# and leave 'force-reload' as an alias for 'restart'.
	#
	#log_daemon_msg "Reloading $DESC" "$NAME"
	#do_reload
	#log_end_msg $?
	#;;
  restart|force-reload)
	#
	# If the "reload" option is implemented then remove the
	# 'force-reload' alias
	#
	log_daemon_msg "Restarting $DESC" "$NAME"
	do_stop
	case "$?" in
	  0|1)
		do_start
		case "$?" in
			0) log_end_msg 0 ;;
			1) log_end_msg 1 ;; # Old process is still running
			*) log_end_msg 1 ;; # Failed to start
		esac
		;;
	  *)
		# Failed to stop
		log_end_msg 1
		;;
	esac
	;;
  *)
	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
	exit 3
	;;
esac

:
